TV Main Panel Replacement A Do It Yourself Guide

By Maria Butler


The television you had is experiencing some issues. Maybe it shows nothing but a black screen. You might be considering a TV main board replacement. You know that buying a new mainboard would cost much. You begin to wonder if you could only change the destroyed component to save some dollars. If you are that person then you are in the right place. Today I will talk about how to replace destroyed components in the mainboard.

Before you begin with any of these steps you should have the necessary tools to remove the board from the TV. You most likely need some screwdrivers for this job. Additional tools can be added depending on the TV model.

Before you could replace the main board, you need to know the exact model of the system that you are trying to repair. You do not wish to waste money buying replacement parts that do not fit with the model you are working on. Know the model first and buying those required parts should give you no trouble.

To replace this part we need to buy the exact part that is used in the mainboard model. This is to ensure that the firmware inside it is compatible with your television. Incompatible firmware simply does not work.

And to complete the preparation process makes sure you have all the replacement parts available. You need them to replace the damaged parts. In our case we need the replacement for the main board, so make sure you have it.

Let us now remove the central panel. To do this we need to remove the screws that hold it in place. Some models also have connectors that you should also need to be removed. Make sure to place the screws in one location to make it handy in the later part of the process. Gently lift the panel from the central chassis. Make sure no wires are destroyed in the process to avoid unnecessary damages to the chassis.

After that, we can now place the replacement part on the chassis. Carefully position the panel on the chassis making sure that the positioning is correct. Put the screws and the connectors on their respective places.

The actual repair of the TV panel should now proceed smoothly. You will be able to do the thinking with an organized feel just by preparing the necessary things beforehand. These might appear very simple but these steps will actually maximize the success that you could be achieving in line with your television main panel replacement job.

Replacing TV mainboards is a lot easier than replacing the EEPROM chip but is also costlier. You will end up throwing the whole board just because of a single component. I am not discouraging you against the replacement of the main board. I am merely showing you another alternative that is also effective in repairing your TV set.




About the Author:



No comments:

Post a Comment