This is the easiest part and anyone can do this. There is a process below and all you have to do is follow them. So you will not be electrocuted. It can be done in a few minutes. Just make sure that it fits perfectly and you will not do anything that will mess it up. Some people does like to replace them all the time.
A good quality of disk prevents you from changing them always. Replacement hard drive does not take time to do it. Especially if you have bought the one to replace them. Before you could do it, you should have to consider some things and follow the procedures given below. And make sure you replace the old one because it is not working anymore.
Here are the steps that you should apply. This is very easy and simplified so anyone will not have a hard time. Always choose something that will benefit you and could save time. When you buy for a new one, make sure that it should be of the same type and is compatible.
Start in backing up your files. You never know what could happen. This is for your own sake. Especially those files that are very important to you. There is a tendency that you could not recover them without moving and making a copy of them. You could transfer it to another hard drive. Like USB that can accommodates a lot of space.
Turn off the PC after. This is very important. Better be safe than sorry. Do not be a hero and just follow these steps. Taking precautionary measures must be observed to avoid accident. Unplug all the wire that is connected to the computer. And never touch anything after you shut it down. You do this for your safety.
Open the case of the CPU after. So you can see the disk inside and take them out. Get ready with your screw drivers. Most of them are screwed. And cannot be easily removed without having to unscrew them all. And if you see some doors, you have to open it too. To prevent scratches or any problem in taking the old one out.
After opening it, go to the location where the old one is located. Be extra careful in doing that. You might touch the other parts and would mess them up. You have to check if it is screwed inside. Otherwise you cannot remove them right away. Unscrew them and see to it that the other parts will not be damage. You will only remove something that needs to be replaced.
Just be careful not to drop them. Use your hands to hold the side. Touching the surface is not advised. Since you do not know what could happen. And also, no touching on the other parts inside. Just do what you are instruct to do. To avoid complication. When you see the jumpers on the side, you could get them. Since you will be needing them to match the new one.
Place the new one and do procedures above. Check if you did not missed anything. Turn on the PC and see if how it works. And the software you have before is still there. If not, install them again.
A good quality of disk prevents you from changing them always. Replacement hard drive does not take time to do it. Especially if you have bought the one to replace them. Before you could do it, you should have to consider some things and follow the procedures given below. And make sure you replace the old one because it is not working anymore.
Here are the steps that you should apply. This is very easy and simplified so anyone will not have a hard time. Always choose something that will benefit you and could save time. When you buy for a new one, make sure that it should be of the same type and is compatible.
Start in backing up your files. You never know what could happen. This is for your own sake. Especially those files that are very important to you. There is a tendency that you could not recover them without moving and making a copy of them. You could transfer it to another hard drive. Like USB that can accommodates a lot of space.
Turn off the PC after. This is very important. Better be safe than sorry. Do not be a hero and just follow these steps. Taking precautionary measures must be observed to avoid accident. Unplug all the wire that is connected to the computer. And never touch anything after you shut it down. You do this for your safety.
Open the case of the CPU after. So you can see the disk inside and take them out. Get ready with your screw drivers. Most of them are screwed. And cannot be easily removed without having to unscrew them all. And if you see some doors, you have to open it too. To prevent scratches or any problem in taking the old one out.
After opening it, go to the location where the old one is located. Be extra careful in doing that. You might touch the other parts and would mess them up. You have to check if it is screwed inside. Otherwise you cannot remove them right away. Unscrew them and see to it that the other parts will not be damage. You will only remove something that needs to be replaced.
Just be careful not to drop them. Use your hands to hold the side. Touching the surface is not advised. Since you do not know what could happen. And also, no touching on the other parts inside. Just do what you are instruct to do. To avoid complication. When you see the jumpers on the side, you could get them. Since you will be needing them to match the new one.
Place the new one and do procedures above. Check if you did not missed anything. Turn on the PC and see if how it works. And the software you have before is still there. If not, install them again.
About the Author:
If you are looking for the facts about a replacement hard drive, go to our web pages online here today. Additional details are available at http://donordrives.com now.
No comments:
Post a Comment